Skip to content
(813) 644-2034tcwholesalecabinetry@gmail.com
TC Wholesale Cabinetry logoTC WholesaleCabinetry

Catalogue

Wholesale Kitchen Cabinets, Factory-Direct

Shop by Finish

Purity WhiteVictory GrayModern GraySilver GrayNatural WoodSeashell Cream

Shop by Type

Base CabinetsWall CabinetsTall & Pantry CabinetsBathroom Vanity CabinetsAccessories & Trim

Product images are technical line drawings with the cabinet's measurements printed on them.

Category
Width
Finish

Base Cabinets

Our shaker base cabinets run from 9 inches to 48 inches wide, with standard 34½-inch height and 24-inch depth — the dimensions every American countertop is sized for. Whether you need a standard double-door unit, a sink base with a full-access opening, a drawer base for utensils, or a blind-corner configuration, each box ships ready to assemble from all-plywood construction with CARB P2-compliant materials.

See all wholesale base cabinets

Wall Cabinets

Shaker wall cabinets pair with any base run and are available in 12-inch depth, with heights from 30 inches to 42 inches (full-height to soffit). Glass-door options let you display dishware while keeping the same five-piece shaker frame. All units include adjustable shelves.

See all wholesale wall cabinets

Tall & Pantry Cabinets

Tall pantry cabinets maximize vertical storage where base cabinets end — 84-inch, 90-inch, and 96-inch heights accommodate standard and 9-foot ceilings. Full-height pantry units anchor a kitchen, laundry, or garage run, and every unit matches the shaker profile of the base and wall lines for a unified look.

See all tall and pantry cabinets

Bathroom Vanity Cabinets

Factory-direct shaker vanity cabinets in single and double configurations — 24-inch through 60-inch widths — built to the same all-plywood box standard as the kitchen line. The vanity cabinet ships without a top so you choose your own countertop and sink. Standard vanity height is 34½ inches. Request a quote for volume or trade orders.

See all wholesale bathroom vanities

Accessories & Trim

Fillers, moldings, skin panels, corbels, and pull-out organizers that finish a cabinet run — the pieces below are priced and ready to order. Additional trim, toe kicks, and appliance panels are available by quote.

Request a free quote for additional trimDownload our cabinet catalog (PDF, 8 MB)

Cabinet sizing & buying questions

What are standard base cabinet sizes?

Base cabinets come in widths from 9 inches to 48 inches, in 3-inch increments. Standard height is 34½ inches (not counting the countertop) and standard depth is 24 inches. The most common widths are 30 and 36 inches. TC Wholesale Cabinetry offers base cabinets in every standard width from 9 to 48 inches — see the grid above for the representative sizes in our Shaker line.

What is the difference between base, wall, and tall cabinets?

Base cabinets sit on the floor and support the countertop — typically 34½ inches tall and 24 inches deep. Wall cabinets mount above the counter, are 12–15 inches deep, and leave counter workspace below. Tall (pantry) cabinets run floor-to-ceiling height (84–96 inches) and provide full-height storage for pantry goods, appliances, or laundry supplies without a separate upper or lower unit.

What are standard wall cabinet sizes?

Wall cabinets typically come in 30-inch or 42-inch heights (the gap is filled with a filler or soffit) and widths that match the base run (9–48 inches). Depth is 12 inches for most kitchen walls and 15 inches for above-refrigerator units. Standard mounting height places the bottom of the wall cabinet 18 inches above the countertop, leaving comfortable working clearance.

What are RTA cabinets and are they good quality?

RTA (ready-to-assemble) cabinets ship flat-packed and are assembled on-site with included hardware — typically within 20–40 minutes per box. Quality varies widely: budget RTA uses particleboard boxes and MDF doors that swell and chip. TC Wholesale Cabinetry's RTA line uses all-plywood boxes and CARB P2-compliant materials — a premium all-wood construction standard at factory-direct pricing.

What sizes do bathroom vanity cabinets come in?

Bathroom vanity cabinets are available in widths from 18 to 72 inches. The most common single-sink sizes are 24, 30, and 36 inches; double-sink vanities are typically 48, 60, and 72 inches. Standard vanity height is 34½ inches (comfort height). TC Wholesale Cabinetry offers shaker vanity cabinets from 24 to 60 inches, shipped without a top so you can pair your own countertop and sink.

What is a shaker-style cabinet?

A shaker cabinet has a five-piece door: a flat center panel recessed within a square-edged frame. The style originated in 19th-century Shaker communities and became the dominant American kitchen door style because it suits both traditional and contemporary hardware and finishes. TC Wholesale's line uses overlay doors for a clean, modern look on the same classic five-piece profile.